My S13 SR20DET Prep
#31
where did u get those hoses when i put my sr in i did some ghetto **** and the hoses ended up getting kinked and i had no heater i found this out when it got cold
i want to do it right this time so everything works
i want to do it right this time so everything works
#33
Engine Bay Painting
I finally cleaned out and painted my engine bay yesterday. Earlier in the week I went in, taped things off, yanked old clips, removed old bolts, washed and wiped and removed any components that I could to avoid bagging them up.
I used Duplicolor...
low gloss black.
Pulled the lower engine harness.
Removed the coolant tank resevoir, P/S resevoir and fuse blocks.
Bagged vital things off.
Before.
After.
Before.
After.
I used Duplicolor...
low gloss black.
Pulled the lower engine harness.
Removed the coolant tank resevoir, P/S resevoir and fuse blocks.
Bagged vital things off.
Before.
After.
Before.
After.
Last edited by positron; 01-16-2008 at 07:30 AM.
#35
#36
Ran into a problem today, I was trying to put together and mount my powersteering bracket and pump and found that they don't fit together. I read on the forums that you can use the DOHC KA power steering pump with the SR power steering pump bracket...well I went to mount mine together and put them on the block and they will not work together. I found out earlier that I received a HICAS SR power steering pump so would it be that the SR HICAS pumps and the regular SR pumps have different brackets?
My KA P/S pump and bracket on the left and the SR HICAS P/S pump and bracket on the right.
Here I have the SR HICAS bracket on the left and as you can see the KA will not fit in that mounting location, it's a tad too long or the mounting location is a tad too short.
So I guess my question is does anyone know if a regular 2wd SR P/S bracket is different from the HICAS bracket and will it mount on my KA P/S pump?
My KA P/S pump and bracket on the left and the SR HICAS P/S pump and bracket on the right.
Here I have the SR HICAS bracket on the left and as you can see the KA will not fit in that mounting location, it's a tad too long or the mounting location is a tad too short.
So I guess my question is does anyone know if a regular 2wd SR P/S bracket is different from the HICAS bracket and will it mount on my KA P/S pump?
#39
i asked durdan about your ps problem. his reply:
durdan: remove pump
durdan: undo back 4 bolts
durdan: pull off rear pump cover
durdan: remove metal vane plates
durdan: reassemble pump
durdan: block of rear pump outlet fitting
durdan: now you have a normal pump
(using the hicas pump on your non hicas car without needing anything different)
durdan: remove pump
durdan: undo back 4 bolts
durdan: pull off rear pump cover
durdan: remove metal vane plates
durdan: reassemble pump
durdan: block of rear pump outlet fitting
durdan: now you have a normal pump
(using the hicas pump on your non hicas car without needing anything different)
Last edited by Bumnah; 01-17-2008 at 12:20 PM.
#41
i asked durdan about your ps problem. his reply:
durdan: remove pump
durdan: undo back 4 bolts
durdan: pull off rear pump cover
durdan: remove metal vane plates
durdan: reassemble pump
durdan: block of rear pump outlet fitting
durdan: now you have a normal pump
(using the hicas pump on your non hicas car without needing anything different)
durdan: remove pump
durdan: undo back 4 bolts
durdan: pull off rear pump cover
durdan: remove metal vane plates
durdan: reassemble pump
durdan: block of rear pump outlet fitting
durdan: now you have a normal pump
(using the hicas pump on your non hicas car without needing anything different)
#42
#43
This Just In!!!
I'm gonna follow Bumnah's path so I got a OEM sidemount intercooler and I'm gonna partner that with a aftermarket hotpipe and b.o.v.
Everythings intact and I got all the hardware.
Cleaned it up a bit.
Permacool fan and Koyo radiator.
Cometic headgasket...I'm scared to put this thing on though.
Can't put this stuff on until I get other stuff so I'm playing the waiting game.....
Everythings intact and I got all the hardware.
Cleaned it up a bit.
Permacool fan and Koyo radiator.
Cometic headgasket...I'm scared to put this thing on though.
Can't put this stuff on until I get other stuff so I'm playing the waiting game.....