Raine's S14 Project: Keira (rawr!)
#151
Mounted my gauges, sharing some pics
Hey-o... was going to update my cardomain page but cardomain site is being odd
A view from the driver's side window area.
3 gauges mounted in the dash - air/fuel, voltmeter, vacuum.
How they look at night.
Tachometer mounted to the center of the gauge cluster.
This is why I mounted a tach in front of the factory tach. When I go touge (or if my eyes hurt at night) I can dim the factory gauges and have only what's important - rpm.
Drivers view of the upper set of gauges (water temp, oil pressure, oil temp)
Better view of how they're mounted to the windshield using Greddy 52mm meter holders.
Pic of the oil pressure line and oil temp sensor mounted to the factory oil pressure switch area (so you know I'm not faking the funk)...
...and the water temp sensor installed inline with the radiator hose (would have been more accurate on the lower hose, but this works fine).
The full effect from the driver's seat. I love it! (note how my stereo and the EDFC unit snuck into the photo LOL)
If you have any questions regarding installation, post them here - I'll be glad to help out right now, so I'm posting the pics here first. Anyhow, I finally got around to installing a full set of gauges in my car... here's pics:
A view from the driver's side window area.
3 gauges mounted in the dash - air/fuel, voltmeter, vacuum.
How they look at night.
Tachometer mounted to the center of the gauge cluster.
This is why I mounted a tach in front of the factory tach. When I go touge (or if my eyes hurt at night) I can dim the factory gauges and have only what's important - rpm.
Drivers view of the upper set of gauges (water temp, oil pressure, oil temp)
Better view of how they're mounted to the windshield using Greddy 52mm meter holders.
Pic of the oil pressure line and oil temp sensor mounted to the factory oil pressure switch area (so you know I'm not faking the funk)...
...and the water temp sensor installed inline with the radiator hose (would have been more accurate on the lower hose, but this works fine).
The full effect from the driver's seat. I love it! (note how my stereo and the EDFC unit snuck into the photo LOL)
If you have any questions regarding installation, post them here - I'll be glad to help out right now, so I'm posting the pics here first. Anyhow, I finally got around to installing a full set of gauges in my car... here's pics:
Last edited by l2aine; 05-06-2005 at 09:43 AM.
#152
Wow that looks good. The first pic kind of confused me though. It looked like the gauges on the dash were reflecting on the top of the window. But the scrool down feature confirmed otherwise. Good job man.
#153
that looks real nice... i just wanted to know how you went about putting them in your dash? Cause i just recently bought oil pressure, water temp, volts. guages and i wanted to put them there but i cant really figure out how to go about it or where to start.
#160
Originally posted by TWAN
Wow that looks good. The first pic kind of confused me though. It looked like the gauges on the dash were reflecting on the top of the window. But the scrool down feature confirmed otherwise. Good job man.
Wow that looks good. The first pic kind of confused me though. It looked like the gauges on the dash were reflecting on the top of the window. But the scrool down feature confirmed otherwise. Good job man.
Originally posted by C-Walk
that looks real nice... i just wanted to know how you went about putting them in your dash? Cause i just recently bought oil pressure, water temp, volts. guages and i wanted to put them there but i cant really figure out how to go about it or where to start.
that looks real nice... i just wanted to know how you went about putting them in your dash? Cause i just recently bought oil pressure, water temp, volts. guages and i wanted to put them there but i cant really figure out how to go about it or where to start.
Originally posted by badman70_1
so much for speed accuracy between 20mph and 50mph....looks good. did you have to remove passenger side airbag?
so much for speed accuracy between 20mph and 50mph....looks good. did you have to remove passenger side airbag?
Then again, I have since removed my passenger-side airbag when I changed steering wheels so clearance wasn't a problem.
Originally posted by SR20detoofast4u
From the looks of it, he didn't have to. The gauges are below the airbag. Correct me if I'm wrong. And Raine, your site is down...when's it gonna be up again?
From the looks of it, he didn't have to. The gauges are below the airbag. Correct me if I'm wrong. And Raine, your site is down...when's it gonna be up again?
#164
oops. yeah it was cardomain....but its up again. Man your a lucky SOB you know that? If i could actually spend money on my cat to add stuff and not "fix" things I'd be a happy person. Heh, I had to throw that in there....and yeah I forgot to say how reat they look!
#165
Originally posted by SR20detoofast4u
oops. yeah it was cardomain....but its up again. Man your a lucky SOB you know that? If i could actually spend money on my cat to add stuff and not "fix" things I'd be a happy person. Heh, I had to throw that in there....and yeah I forgot to say how reat they look!
oops. yeah it was cardomain....but its up again. Man your a lucky SOB you know that? If i could actually spend money on my cat to add stuff and not "fix" things I'd be a happy person. Heh, I had to throw that in there....and yeah I forgot to say how reat they look!