FS: Built RB20 95 240sx
07-30-2007 | 10:03 PM
#1
Thread Starter
Registered User
Joined: Nov 2004
Posts: 165
From: Oklahoma
FS: Built RB20 95 240sx (New price and more Pictures/Video)
I really need to sell my car. I'm going off to college and need to sell for many reason. I've been working on it on and off for over the last year or so.
Mods:
RB20DET, RB Tranny, Tophatperformance motor mounts and tranny mount, GT32(51E) Turbo, Styder intake manifold, top mount exhaust manifold(with heat wrap), custom 3" downpipe and exhaust to a Apexi N1 muffler (also heat wrapped), Tomei Proncams,480CC Injectors, Apexi SAFCII, Zeitonix Wideband Controller (with PC program), Dual Flex-Light Fans, Walbro 255 Fuel pump, Z32 (300ZX TT) Maf with Tomei connector, Apexi Airfilter, Greddy Full Auto turbo timer, Koyo Radiator, Sard BOV, Turbonetics 38MM Wastegate, Megan Racing FPR, Custom FMIC piping (polished) with a Megan Racing FMIC. T-bolt camps for every coupler, Stage 3 Clutch (supports over 500HP/TQ) JGYcustoms’ 12lb Flywheel, LSD, Greddy 1.0mm metal headgasket, brand new gaskets/rings/seals. Battery relocated to trunk, plus many custom made things to make everything work. interior is very clean. No cracks in dash. Leather seats, only the driver seat has some rips. Autometer boost gauge all stock body, one dent in the drivers side quater panel. Stock suspension. 5 lug and SE wheels. It starts but doesn't idle (right now) I'm working to get that fixed (with putting a nipple on the cold pipe and making the AICV work). No electrical problems at all! I have all the stock parts off the motor and will give to buyer free of charge. I'm one of the few with the intake manifold like this in the states. most have them going over the top of the motor
Pictures ( are a little old, no intercooler pipes, but all that is done)
Video:
http://s23.photobucket.com/albums/b3...t=3eb49cef.flv
I can use a good tune. And very capable of making up to 400hp if not more.
Asking price 12,500 obo.
very fun car! Located in Oklahoma.
Email: StadtischAchten@aol.com AIM: StadtischAchten if u got questions!
Thanks for looking
Mods:
RB20DET, RB Tranny, Tophatperformance motor mounts and tranny mount, GT32(51E) Turbo, Styder intake manifold, top mount exhaust manifold(with heat wrap), custom 3" downpipe and exhaust to a Apexi N1 muffler (also heat wrapped), Tomei Proncams,480CC Injectors, Apexi SAFCII, Zeitonix Wideband Controller (with PC program), Dual Flex-Light Fans, Walbro 255 Fuel pump, Z32 (300ZX TT) Maf with Tomei connector, Apexi Airfilter, Greddy Full Auto turbo timer, Koyo Radiator, Sard BOV, Turbonetics 38MM Wastegate, Megan Racing FPR, Custom FMIC piping (polished) with a Megan Racing FMIC. T-bolt camps for every coupler, Stage 3 Clutch (supports over 500HP/TQ) JGYcustoms’ 12lb Flywheel, LSD, Greddy 1.0mm metal headgasket, brand new gaskets/rings/seals. Battery relocated to trunk, plus many custom made things to make everything work. interior is very clean. No cracks in dash. Leather seats, only the driver seat has some rips. Autometer boost gauge all stock body, one dent in the drivers side quater panel. Stock suspension. 5 lug and SE wheels. It starts but doesn't idle (right now) I'm working to get that fixed (with putting a nipple on the cold pipe and making the AICV work). No electrical problems at all! I have all the stock parts off the motor and will give to buyer free of charge. I'm one of the few with the intake manifold like this in the states. most have them going over the top of the motor
Pictures ( are a little old, no intercooler pipes, but all that is done)
Video:
http://s23.photobucket.com/albums/b3...t=3eb49cef.flv
I can use a good tune. And very capable of making up to 400hp if not more.
Asking price 12,500 obo.
very fun car! Located in Oklahoma.Email: StadtischAchten@aol.com AIM: StadtischAchten if u got questions!
Thanks for looking
Last edited by Urban Outlaw; 11-24-2007 at 02:49 PM.
08-01-2007 | 01:49 PM
#5
Thread Starter
Registered User
Joined: Nov 2004
Posts: 165
From: Oklahoma
BUMP!
Note: should get ordering a carbon fiber hood in the next couple of days as long as all the money falls in place right. And when idle problem is fixed the car will get repainted! the price will stay the same
Note: should get ordering a carbon fiber hood in the next couple of days as long as all the money falls in place right. And when idle problem is fixed the car will get repainted! the price will stay the same
08-01-2007 | 04:31 PM
#6
Thread Starter
Registered User
Joined: Nov 2004
Posts: 165
From: Oklahoma
updated pics:
wrapped DP and Exhaust
Motor shot
Another
The wiring is kinda just laying out everywhere. but it'll be cleaned up and hiden. And the Coilpack cover will be painted black to match everything
wrapped DP and Exhaust
Motor shot
Another
The wiring is kinda just laying out everywhere. but it'll be cleaned up and hiden. And the Coilpack cover will be painted black to match everything
08-01-2007 | 05:42 PM
#7
Thread Starter
Registered User
Joined: Nov 2004
Posts: 165
From: Oklahoma
the interior
the battery relocated
the one dent
its really dirty lol. Other then that the paint is really what u'd find on a 12 year old car... some spots the clear coat is coming off. But as I stated depending on when u offer a price. The car is getting repainted soon!
the battery relocated
the one dent
its really dirty lol. Other then that the paint is really what u'd find on a 12 year old car... some spots the clear coat is coming off. But as I stated depending on when u offer a price. The car is getting repainted soon!
