89 240sx w/SR20DET & suspension & more
#1
89 240sx w/SR20DET & suspension & more
I'm selling my 1989 240sx with S13 black top SR swap and some suspension work. The swap was finished in 2002 and the car has been running excellent since. The car is always parked inside garage.
The following is the list of all the mods:
Engine modification:
SR20DET Engine (180sx Type X BLK Top)
T28 BB turbo (S15 turbo)
TAKA steel braided water & oil lines
BLITZ FMIC
BLITZ 3" cat-back exhaust
BLITZ 1.3 kpa radiator cap
SARD R2D2 BOV
GREDDY 3" down pipe
GREDDY oil catch can
PROJECT SILVIA 3" test pipe
HIPER GROUND ground wires
HPI engine damper
K&N filter
TOYOTA SUPRA MK III radiator
B&M fuel gauge
NISMO fuel pressure regulator
300ZX TT fuel pump
300ZX brake master cylinder
Suspension modification:
CUSCO Comp S adjustable coilovers
CUSCO front camber plates
CUSCO front upper strut bar
CUSCO front tension rod bar
CUSCO rear upper control arms
CUSCO rear upper strut bar
CUSCO 5 pt roll cage
S13 VLSD (Canadian spec)
TANABE front sway bar
TANABE rear sway bar
TANABE tension rods
T3 subframe bushing collars
Internal modification:
NISMO shift ****
PERSONAL hub
NARDI steering wheel
BLITZ horn buttom
BLITZ BG boost gauge
BLITZ BG oil pressure gauge
BLITZ exhaust gas temp gauge
BLITZ power meter -ID
BLITZ SBC boost controller
BLITZ turbo timer
PIVOT headlights controller
SABELT 4-pts seat belt harness (camlock on driver side, clubman on passenger side)
SANYO mini-disc player
S2000 style push start button
External modification:
KOUKI front bumper lenses
KOUKI tail lenese
KOUKI side skirts
1993 Front bumper
WANGAN style wing
HEXON headlights
PIAA Super plasma GT-U H4 bulbs
Custom Carbon Fiber mirrors
Shaved rear spoiler holes
Shaved antenna
Shaved body lines
300ZX TT Front brake calipers
Brembo cross & drilled front brake discs (front & rear)
BFG front brake steel lines
5 lugs conversion (rear)
DT05-R Hiper Black 17x7 front
VOLK RACING TE-37 17x8.5 rear
FALKEN Tires 215/40/17 & 235/45/17
Please goto my web page for pics. http://www.geocities.com/tm180sx2000/mygarage.html
That was my first time to paint car, the paint job is not perfect but acceptable, (paint job may need if you prefer a show car). Also a little body work may needs, the headlights may have to re-aline since it had a little acccident before, but I've been driving it since, it looks normal and works, it just has a little gap between the front bumper and the hood.
I'm asking $8000 obo. I'm not going to part out my car. If you have any questions, please contact me at terrykmak@hotmail.com. Thanks.
The following is the list of all the mods:
Engine modification:
SR20DET Engine (180sx Type X BLK Top)
T28 BB turbo (S15 turbo)
TAKA steel braided water & oil lines
BLITZ FMIC
BLITZ 3" cat-back exhaust
BLITZ 1.3 kpa radiator cap
SARD R2D2 BOV
GREDDY 3" down pipe
GREDDY oil catch can
PROJECT SILVIA 3" test pipe
HIPER GROUND ground wires
HPI engine damper
K&N filter
TOYOTA SUPRA MK III radiator
B&M fuel gauge
NISMO fuel pressure regulator
300ZX TT fuel pump
300ZX brake master cylinder
Suspension modification:
CUSCO Comp S adjustable coilovers
CUSCO front camber plates
CUSCO front upper strut bar
CUSCO front tension rod bar
CUSCO rear upper control arms
CUSCO rear upper strut bar
CUSCO 5 pt roll cage
S13 VLSD (Canadian spec)
TANABE front sway bar
TANABE rear sway bar
TANABE tension rods
T3 subframe bushing collars
Internal modification:
NISMO shift ****
PERSONAL hub
NARDI steering wheel
BLITZ horn buttom
BLITZ BG boost gauge
BLITZ BG oil pressure gauge
BLITZ exhaust gas temp gauge
BLITZ power meter -ID
BLITZ SBC boost controller
BLITZ turbo timer
PIVOT headlights controller
SABELT 4-pts seat belt harness (camlock on driver side, clubman on passenger side)
SANYO mini-disc player
S2000 style push start button
External modification:
KOUKI front bumper lenses
KOUKI tail lenese
KOUKI side skirts
1993 Front bumper
WANGAN style wing
HEXON headlights
PIAA Super plasma GT-U H4 bulbs
Custom Carbon Fiber mirrors
Shaved rear spoiler holes
Shaved antenna
Shaved body lines
300ZX TT Front brake calipers
Brembo cross & drilled front brake discs (front & rear)
BFG front brake steel lines
5 lugs conversion (rear)
DT05-R Hiper Black 17x7 front
VOLK RACING TE-37 17x8.5 rear
FALKEN Tires 215/40/17 & 235/45/17
Please goto my web page for pics. http://www.geocities.com/tm180sx2000/mygarage.html
That was my first time to paint car, the paint job is not perfect but acceptable, (paint job may need if you prefer a show car). Also a little body work may needs, the headlights may have to re-aline since it had a little acccident before, but I've been driving it since, it looks normal and works, it just has a little gap between the front bumper and the hood.
I'm asking $8000 obo. I'm not going to part out my car. If you have any questions, please contact me at terrykmak@hotmail.com. Thanks.
#3
pics arent working. send me some pics at flatline16@comcast.net
Thread
Thread Starter
Forum
Replies
Last Post
Bernie (NoVA)
For Sale - Suspension / Brakes / Handling
2
04-03-2012 07:34 AM
Bernie (NoVA)
For Sale - Part Outs
9
05-11-2009 08:59 PM
darius
For Sale - Cars For Sale
3
07-30-2007 10:44 PM
boney
For Sale - Cars For Sale
0
07-30-2006 10:53 AM
boney
For Sale - Cars For Sale
1
07-02-2006 08:10 PM