Ok I have a 1990 240sx coupe with a 6.6 Liter Small Block Chevy V8 in it. I'm still building it and I really need to replace my one quarter (very wavy). So yesterday I come across a 1994 240sx Convertible and made an offer (I need a parts car). Anyhow I got the car and I will be pulling a lot of the body panels off, a few interior parts, rack and pinion, rear, brakes yada yada yada anyhow after I'm done this the car is trash to me. I just want spare parts.

You get the car what’s left of car, and title. I don’t need to touch the motor or transmission. It’s complete with starter, alt, AC, all pumps, pulleys.

You pick it up, Car will not have wheel, and after it’s on your trailer I want to pull the wheels so bring a set to take it back off. I’m in Philadelphia PA and $200.00 or more takes her.

Both doors,
passanger fender
hood
lights
radiator support, radiator stays i dont need it
rack and pinion and steering hoses
master cyliner
tire rods and ends
wheels,
brake calipers
inner fender and inner quarters
quarter panels
gas tank
trunk floor pan
deck lid
rear bumper
rear sheet metal under bumper
rear frame rails
rear end

wow i forgot I had the factory motor from my 1990 240sx its the 12 valve SOHC motor with flywheel, and pressure plate, no pumps. You can have this with the other motor no extra charge, I was gonna junk it.

 

The list of parts is what im pulling off of it

 

Hey, I'm deployed in Iraq right now with the army, but my wife or my pop could pick up the car for me(I really only want the engine). Do you know how it runs/how many miles on it? You can email me jcj_240 @ yahoo . com, or aim me at youngcassidy415.

 

Hey I had a charger on her all day and it wouldn't take a charge so I jumped it and it turned over. No smoke, not blown, and it runs strong after a moment it died, it ran out of gas. Tomorrow ill put in a few gallons in it and run it a while. Like I said in the post ill be taking a lot of body parts off of it and such. O;; take it up the street and back to test the transmission. I checked the oil and the coolant and everything looked fine. I have a digital video camera so ill if you want ill show you video of it running. I already pulled the trunk, and started cutting off the quarter panel. I think the motor would do you good if you need it, just clean it up flush it out and all I think it will be a good replacement or good build project.

 

can you get this?



it's the driver side power window amplifier

 

Yeah I got that. My project 240 has P win / P locks this one only has p windows so ill sell it to you, I need the door skin tho. Lets say 20 bucks shipped

 

i need the drivers side door if its in good condition with no dents!

how much shipped to 63031

i have cash in hand

 

Nah sory I need that door, mine is creased so I cant sell it

 

i need that fender do you still have it (passager side?) email colombiantype-r@hotmail.com i live in philly so i can pick it up asap

 

you still got the wiring harness?

All i need is all the light connectors for the front, the headlights, the side lights, the blinkers, etc.

I need the connectors with them. if they dont have connectors I will still take them.

so all the light wiring, not the complete wiring harness!!!

 

I have two sets of complete s13 headlights so I can part with a set. The one set I would like to sell with the front clip. Now I cant sell you the complete lighting harness. I need with wiring for simplicity for my s15 conversion (sold the parts car) But I dont need the connectors I could cut them off with some slack and send them to ya with the set of headlights (black pop ups) Off a 94

 

I can't use the popup lights anymore, I have the Silvia conversion!

oh, I got a harness, got it from my coupe part out

 

S13 5 speed ABS driveshaft perhaps? I need one asap.

 

i need the tie rod ends how much shipped to 10314

 

I need the rear window switch from the center console shipped to 01541.

What condition is the vinyl rear window/curtain piece in?