Private For Sale / Wanted Sell an item in here or look for a particular part that you need.

Parting out 1990 FB Auto SOHC

 
Thread Tools
 
Search this Thread
 
Old 03-07-2005 | 07:52 AM
  #1  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
Parting out 1990 FB Auto SOHC

I'm parting out the 90. There is alot of usable stuff on it. Nothing race right now. SO it's all stock.
Just about everything is there( glass, dors, interior, ect), it is just a matter of the condition it may be in.
I'm not going to waste time, listing everything or taking & posting pics. I will do that if the demand is high enough. All parts ar estill on the car, because if I dont sell enough i'm keeping it.
I do not take paypal. Inly Cash, check, MO. Local pick up is ok, I dont mind( less work for me). Buyer pays shipping.
if yo uwant pics just ask. If there is somethign you want that I dont list just ask.
make REASONABLE offers on all of it.

1990 SE FB with no options( except AC)
1992 front end
Both the 90 & 92 front lip

MAF adapter( that Ebay thing, I believe) with cone filter.

Complete running engine & auto tranny runs & shifts great. Mileage unknown. Doesnt smoke, knock, ect..

Aother Complete SOHC Engine & auto tranny. Engine I believe has a #3 bearing gone. Auto tranny is fine. Mileage unknown( less manifolds & VC)..will part out( head, pistons, ect..) but prefer not to.

Excellent condition steering rack with NEW tie rod ends & boots. Bought from N.O.W. I installed it & works great. Only put about 5 miles on it, since i had it.

Newer radiator. Great condition. Will have it cleaned at extra cost( but it doesnt really need it).

Front brakes & calipers have about 5 miles on them. NEW calipers( rotors & pads are new also)
REAR rotors & pads still in box. Bought from NAPA.
That is about it for notable things, that I can think of.


Or ofcourse the entire car can be bought.I really dont have time for it right now. With all the Dr appts & being hurt. I just really cant do much to it anymore.
but if I dont get some bites within a few days. I'm either going to scrap it or fix it. I dont know. I'll cross that road when it comes.

Last edited by Project Cheap13; 03-08-2005 at 01:44 PM.
Old 03-08-2005 | 01:45 PM
  #2  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
Ok. I'm looking at crushing it.
Old 03-08-2005 | 03:26 PM
  #3  
fyneyoungstunna's Avatar
Registered User
 
Joined: Oct 2004
Posts: 64
hey dont crush it just yet
does it run???
how much u asking????
Old 03-08-2005 | 05:44 PM
  #4  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
If you are nowhere near SW fl then it really isnt worth your time. but if you must know.

It runs pretty damn good. New plugs, wires, cap & rotor. New tie rods, & steering rack boots. New steering rack bushings. New engine mounts. New brakes F & R w/ new calipers on the front. New fuel pump & filter. Newer tires( but need to be replaced). Newer carpet.
Interior is nice when I dont store things in it( also has a JVC deck w/12 disc changer. Pioneer 6.5" in the doors & 4x6 sony's in the rear).
The hatch is shot to hell. I have it held down with pins right now.
It has a good amount of damage in the trunk area. I fixed most of it so the lights & everything match up. The body is in anything but good condition. The only real damage is in the back though. But new fenders will cure that( good candidate for some 50mm fenders).

I have spent TONS of time & a decent amount of cash on this car to get it to where it is. I just dont have time & energy for it anymore. I hate to sell it or even part it, because i am loosing my a** on it.
Hell the parts alone could be sold if I took them off for over $1000. But it isnt really worth my time. Especially since no one asked. So i'm going to take off what I can by Fri & scrap it on Sat.
Unless I have a change of heart( because of the loss of cash. I may HAVE to keep it).
Pics when I first got it
http://www.picturetrail.com/gallery/...8194&members=1
Pics after I replaced parts & did some body work
http://www.picturetrail.com/gallery/...8194&members=1
Then just imagine it with a 92 front end now.
Old 03-08-2005 | 05:51 PM
  #5  
fyneyoungstunna's Avatar
Registered User
 
Joined: Oct 2004
Posts: 64
so how much u asking???????
would it make the trip back to colorado?????
Old 03-08-2005 | 06:50 PM
  #6  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
colorado....on a trailer( I havent driven it out of the county nor over 50 MPH & it hasnt been driven more than 1000 miles in QUITE a long time). You would also need to take all the parts mentioned in the first post. I want NOTHING left here. So unless you feel like dumping the extra engine & trans in the hatch. I HIGHLY suggest you use a trailer.
I'm looking for $500-700 NO LESS. But for that price you wont get the stereo & i'm quickly thinking of changing my mind.
Old 03-09-2005 | 07:47 AM
  #7  
fyneyoungstunna's Avatar
Registered User
 
Joined: Oct 2004
Posts: 64
payments??????
or payments at least on the engine??????
Old 03-09-2005 | 09:20 AM
  #8  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
Honestly if you need to make payments this isnt the vehicle for you.

Just saving you from alot of heartache.
Old 03-09-2005 | 12:46 PM
  #9  
fyneyoungstunna's Avatar
Registered User
 
Joined: Oct 2004
Posts: 64
lol thats kinda true but i need an engine bad i already got a 240...the reason i need t make payments is cause that damn overseas scam got me right before it got big(screams f*** and kicks the tabel) but itll be ok
Old 03-10-2005 | 06:37 AM
  #10  
Project Cheap13's Avatar
Thread Starter
Contributing Member
 
Joined: Mar 2004
Posts: 503
From: Panama
Do you need the engien engien assembly? Or just certain parts?
Old 03-10-2005 | 08:12 AM
  #11  
japan-air's Avatar
Registered User
 
Joined: Jan 2005
Posts: 65
I need mudguards for all 4 corners (not mudflap), those plastic inside the wheel well.

Also, radio brackets. how much shipped to ca 91748. Thanks
Old 03-10-2005 | 11:45 AM
  #12  
ja240sx's Avatar
Registered User
 
Joined: Sep 2004
Posts: 6
From: houston tx
how much do you want for the 90 front bumper lip? shipped to 77489
Old 03-10-2005 | 02:38 PM
  #13  
fyneyoungstunna's Avatar
Registered User
 
Joined: Oct 2004
Posts: 64
i need complete engine everyhing to drop into my car
Old 03-10-2005 | 11:11 PM
  #14  
mrsurfs's Avatar
Registered User
 
Joined: Aug 2004
Posts: 37
From: florida
hey i want the whole car i live in sw fl. email is mrsurfs@hotmail.com please send me address to look at it
Old 03-11-2005 | 01:33 PM
  #15  
ichibanset's Avatar
Registered User
 
Joined: Oct 2004
Posts: 6
you have pics of the dash and center console? and how much? shipped to so cal?



All times are GMT -7. The time now is 07:51 AM.