Bee-R revlimiter Install Diagram
#1
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Misawa, Japan
Posts: 5,091
Bee-R revlimiter Install Diagram
Due to Request..
Yea i got this from the site where i bought mine from.... i doctored it up a bit with the pins/ecu diagram i used after going through my FSM.... this is for the OBD1 setup.. ill cross reference later and see if its the same for obdII
its not a write up with pics... just a simple diagram. it will take a good electronic guy about 20min to do if he knows how to read schematics. it took me a total time of about 20-25min in all.
TEST FIIIIIIIIRRRREEE!!!!
Yea i got this from the site where i bought mine from.... i doctored it up a bit with the pins/ecu diagram i used after going through my FSM.... this is for the OBD1 setup.. ill cross reference later and see if its the same for obdII
its not a write up with pics... just a simple diagram. it will take a good electronic guy about 20min to do if he knows how to read schematics. it took me a total time of about 20-25min in all.
TEST FIIIIIIIIRRRREEE!!!!
Last edited by Biggamehit; 01-14-2008 at 12:50 AM.
#3
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Misawa, Japan
Posts: 5,091
250 bucks is not bad and yea its a great way to protect your engine to me from overboost and overreving.. it has helped me twice already... right after this install my wastegate line came off while drifting.. and phhhhhhhhhhhhhhhhhhhhhhhhhhhh pop pop...
and not to mention its just cool as ****...
and not to mention its just cool as ****...
#15